| 181FPH-CS
|
 |
| FLOOR PAN COMPLETE SET WITH HARDWARE INSTALLED, OE QUALITY |
Better than any other floor pan available!
Finally a Completed Floor Pan SET!
Save time and money! We now sell floor pans with installed Seat Tracks, Jack Receivers, Jack Supports, Floor Mat Clips, Rear Battery Bracket, Nut for Battery Hold down, Nut for Front Seat Belt, Nut for Clutch & Pedal Adjustment.
Items that come with but are not installed on pans: the Front Axle Support Plates, Chassis to Body Bolt Kit and Floor Pan Seals.
Note: Flat rate shipping of $145.00 to continental U.S. addresses. |
|
|
|
|
|
|
|
|
|
|
| 181 PR-FL
|
 |
| FLOOR PAN ECONOMY PATCH PANEL, FRONT LEFT |
| We offer steel quarter pan replacements to fix your rusted or damaged panels. They are only intended to be used when just a quarter is necessary. If you need a full half, don't use these... buy the full pan halves and save labor. Stamped to give your floor an original appearance after they are welded in place correctly. |
|
|
|
|
|
|
|
|
|
|
| 181 PR-FR
|
 |
| FLOOR PAN ECONOMY PATCH PANEL, FRONT RIGHT |
| We offer steel quarter pan replacements to fix your rusted or damaged panels. They are only intended to be used when just a quarter is necessary. If you need a full half, don't use these...buy the full pan halves and save labor. Stamped to give your floor an original appearance after they are welded in place correctly. |
|
|
|
|
|
|
|
|
|
|
| 181 PR-RL
|
 |
| FLOOR PAN ECONOMY PATCH PANEL, REAR LEFT |
| We offer steel quarter pan replacements to fix your rusted or damaged panels. They are intended to be used when only a quarter is necessary. If you need a full half, don't use these...buy the pan halves and save a lot of labor. Each quarter is stamped to give your floor an original appearance after they are welded correctly. Install with a wire feed welder for best results.
(NOTE: 26 INCHES LONG) |
|
|
|
|
|
|
|
|
|
|
| 181 PR-RR
|
 |
| FLOOR PAN ECONOMY PATCH PANEL, REAR RIGHT |
| We offer steel quarter pan replacements to fix your rusted or damaged panels. They are intended to be used when only a quarter is necessary. If you need a full half, don't use these...buy the pan halves and save a lot of labor. Each quarter is stamped to give your floor an original appearance after they are welded correctly. Install with a wire feed welder for best results.
(NOTE: 26 INCHES LONG) |
|
|
|
|
|
|
|
|
|
|
| 181 PR-RL-LONG
|
 |
| FLOOR PAN ECONOMY PATCH PANEL, REAR LEFT LONG |
| Our classic replacement floor panel quarters, but with an improvement. At 36", they're 10" longer than our original panels, which used to leave a gap between the front and rear panels. With these, everything should fit nice and snug. |
|
|
|
|
|
|
|
|
|
|
| 181 PR-RR-LONG
|
 |
| FLOOR PAN ECONOMY PATCH PANEL, REAR RIGHT LONG |
| Our classic replacement floor panel quarters, but with an improvement. At 36", they're 10" longer than our original panels, which used to leave a gap between the front and rear panels. With these, everything should fit nice and snug. |
|
|
|
|
|
|
|
|
|
|
| 181827025
|
 |
|
|
| 181821302
|
 |
|
|
| 181821021E
|
 |
|
|
| 181809103A
|
 |
|
|
| 181809151
|
 |
|
|
| 181809152
|
|
|
|
| 181813315
|
 |
|
|
| 181809191
|
 |
|
|
| 181833052
|
 |
|
|
| 181833051U
|
|
|
|
| 181833052U
|
|
|
|
| 181809812
|
 |
|
|
| 181813301E
|
 |
|
|
| 181805587
|
 |
|
|
| 181809161
|
 |
|
|
| 181809186
|
 |
|
|
| 181805591F
|
 |
| FRONT APRON - FACE ONLY |
| Front apron (face only) sheet metal panel. This is the vertical apron piece for the front of your Thing. Does not include the horizontal hood lock portion. 
|
|
|
|
|
|
|
|
|
|
|
| 181809021
|
 |
|
|
| 181809110C
|
 |
|
|
| 181801251T-252T
|
 |
|
|
| 181899CBK-W
|
 |
|
|
| 181827025S
|
 |
|
|
| 181701000
|
 |
|
|
| 181821301-U
|
 |
|
|
| 181809151RPP
|
 |
| REAR ROCKER PATCH PANEL, OUTER LEFT |
| Rear Rocker Panel repair patch. Weld in front of the rear tire where the traditional rust always forms. Easier than replacing the entire Rocker Panel. |
|
|
|
|
|
|
|
|
|
|
| 181809152RPP
|
 |
| REAR ROCKER PATCH PANEL, OUTER RIGHT |
| Rear Rocker Panel repair patch. Weld in front of the rear tire where the traditional rust always forms. Easier than replacing the entire Rocker Panel. |
|
|
|
|
|
|
|
|
|
|
| 181805583AM
|
 |
|
|
| 181FPH-S
|
 |
| FLOOR PAN SET, OE QUALITY |
Better than any other floor pan available!
These halves are made in Europe and are the same thickness as the original pans. Fits your pan exactly. The inside edge starts at the center tunnel, including the bolt pattern area under the rocker. It is necessary to drill out the holes around the rockers, and there are dimple marks to drill from.
Note: Flat rate shipping of $165.00 to continental U.S. addresses. |
|
|
|
|
|
|
|
|
|
|
| 181FPH-R
|
 |
| FLOOR PAN RIGHT SIDE, OE QUALITY |
Better than any other floor pan available!
These halves are made in Europe and are the same thickness as the original pans. Fits your pan exactly. The inside edge starts at the center tunnel, including the bolt pattern area under the rocker. It is necessary to drill out the holes around the rockers but there is a dimple marked to drill from.
Note: Flat rate shipping of $200.00 to continental U.S. addresses. |
|
|
|
|
|
|
|
|
|
|
| 181FPH-L
|
 |
| FLOOR PAN LEFT SIDE, OE QUALITY |
Better than any other floor pan available!
These halves are made in Europe and are the same thickness as the original pans. The inside edge starts at the center tunnel, including the bolt pattern area under the rocker. It is necessary to drill out the holes around the rockers but there is a dimple marked to drill from.
Note: Flat rate shipping of $200.00 to continental U.S. addresses. |
|
|
|
|
|
|
|
|
|
|
