VW Thing Speedometer Cable.
Speedometer cables can break for a variety of reasons. If yours is broke, it may mean that the speedometer head is frozen or has a bad spot that makes it stick temporarily. Before installing the new cable, attach it into the speedometer head and turn it by hand. It should spin without binding. Another reason for a cable to break is incorrect routing or kinking the cable while installing it. After routing the cable and prior to attaching to wheel hub, spin the cable by hand. It should spin with no binding. If it is difficult to spin you may have routed it incorrectly which will damage the cable. We recommend replacing the Speedometer Spindle Grommet (item 111957855) and the Speedometer Body Grommet (item 111957861) to make sure your cable stays routed and aligned properly. Lube the grommets before installing them. We do not warranty the cables due to the risks that a bad speedometer head or faulty installation pose.
In compliance with California Law, we are providing the following WARNING: Cancer and Reproductive Harm
The Thing Shop has the Largest Selection of VW Thing Parts in the World!