| 111711115A
|
 |
|
|
| 181885597
|
 |
| RUBBER RETAINER |
| For the backrest support bow. Holds the mounted bow that is on the cushion frame. Can also be used on the hood and the rear deck lid support. 6 are required to replace all locations on your car. 
|
| Special Pricing Available |
|
|
|
|
|
|
|
|
|
|
| 111957861
|
 |
|
|
| 111957855
|
 |
| SPEEDOMETER SPINDLE GROMMET |
| VW Thing Speedometer Spindle Grommet. Fits into Stearing Knuckle Spindle and keeps Speedometer Cable aligned. |
|
|
|
|
|
|
|
|
|
|
| 111957375
|
 |
|
|
| 181847549
|
 |
|
|
| 141941147
|
 |
|
|
| 181955TTS-S
|
 |
| WIPER BLADE SET W/ RUBBER INSERTS |
These wiper blades have a removable/replaceable rubber insert. This wiper blade attaches to the original wiper arm the same as the original wiper blades did.
Sold as a set of 2. |
|
|
|
|
|
|
|
|
|
|
| 181837912B
|
 |
|
|
| 181837911B
|
 |
|
|
| 111405641B
|
 |
|
|
| 113953193
|
 |
|
|
| 181RPK
|
 |
| RUBBER PARTS KIT |
| Includes: Front Turn Signal Gaskets with Drain Tubes, Gearshift Boot, Hand Brake Boot, Pedal Pads, Accelerator Pad, Front and Rear Engine Seals. |
|
|
|
|
|
|
|
|
|
|
| 181RPKD
|
 |
| RUBBER PARTS KIT - DELUXE |
| Includes: Front Turn Signal Gaskets with Drain Tubes, Gearshift Boot, Hand Brake Boot, Pedal Pads, Accelerator Pad, Front and Rear Engine Seals, Headlight Bucket Drain Tube and Grommet Tube Body to Fender . |
|
|
|
|
|
|
|
|
|
|
| 181941185C
|
 |
|
|
| 181857849A
|
 |
|
|
| 181845137
|
 |
| SEAL, WINDSHIELD, UPPER OR LOWER |
| This goes on the outside of the upper and/or lower windshield frames, to seal against the convertible top and body, respectively. Two are needed per car. |
|
|
|
|
|
|
|
|
|
|
| 181847449
|
 |
|
|
| 111881100
|
 |
|
|
| 181821705
|
 |
|
|
| 111301263HD
|
 |
|
|
| 181821004-9
|
 |
|
|
| 181867369P
|
 |
| PLASTIC END CAPS |
These are the end caps that are on top of your doors and the backs of your rear seats. More than likely you're missing some because of their plastic construction. They have the same original linen finish as our body beading.
SOLD AS A SET OF 10 ONLY |
|
|
|
|
|
|
|
|
|
|
| 181809BMK-74
|
 |
| BODY MOLDING KIT 1974 |
| Includes: Hood Seal, Upper and Lower Windshield Seals, Molding under windshield on body, Windshield Weatherstrip, Molding for around body, Beading for top of doors, Door Pocket Beading, Rear Seat Molding, Rear Deck Lid Seal , and Intake Duct Beading. |
|
|
|
|
|
|
|
|
|
|
| 181809BMK-73
|
 |
| BODY MOLDING KIT 1973 |
| Includes: Hood Seal, Upper and Lower Windshield Seals, Molding under windshield on body, Windshield Weatherstrip, Molding for around body, Beading for top of doors, Door Pocket Beading , Rear Seat Molding and Rear Deck Lid Seal. |
|
|
|
|
|
|
|
|
|
|
| 181837911912
|
 |
|
|
| 211837177S
|
 |
| RUBBER WEDGE, STRIKER PLATE, SET OF 4 |
| A quality replacement part from The Thing Shop made for your VW Thing. Will correct some of the problems with the door latching during your restoration, SET OF 4. This is for a VW Thing only and is not the type used on other VW models that uses a screw to hold it on. No screws are required. |
|
|
|
|
|
|
|
|
|
|
| 311711461
|
 |
|
|
| 111823461
|
 |
|
|
| 181957861
|
|
|
|
| 181955TTS-R
|
 |
| WIPER BLADE REPLACEMENT RUBBER INSERT |
| Wiper blade Rubber Insert replacement for our quality replacement wiper blade. These inserts will not fit on your original Thing wiper blades - they'll only work on our own replacement Wiper Blades. The original Thing wiper blades did not allow you to change the rubber part. |
|
|
|
|
|
|
|
|
|
|
| 181955325CAP
|
 |
| CONNECTING ROD CAP, Set of 2 |
| This cap replaces the screw-on end to the wiper connecting rod. The new cap will snap onto the wiper arm pivot ball. |
|
|
|
|
|
|
|
|
|
|
| 113611320-2
|
 |
|
|
