Sheet Metal

Finally a Completed Floor Pan SET ! Save time and money! We now sell floor pans with installed Seat Tracks, Jack Receivers, Jack Supports, Floor Mat Clips, Rear Battery Bracket, Nut for Battery Hold down, Nut for Front Seat Belt, Nut for Clutch & Pedal Adjustment. Items that come with but are not installed on pans: the Front Axle Support Plates, Chaise to Body Bolt Kit and Floor Pan Seals. Note: Get half off shipping in the U.S. when you order a set of pan halves. Overseas and international shipping still full price.

181 FPH-L

FLOOR PAN REPLACEMENT LEFT SIDE

These halves are made in Europe and are the same thickness as the original pans. The inside edge starts at the center tunnel, including the bolt pattern area under the rocker. It is necessary to drill out the holes around the rockers but there is a dimple marked to drill from. Get half off shipping in the U.S. when you order a set of pan halves. Overseas and international shipping is still full price.

181 FPH-R

FLOOR PAN REPLACEMENT, RIGHT SIDE

These halves are made in Europe and are the same thickness as the original pans. Fits your pan exactly. The inside edge starts at the center tunnel, including the bolt pattern area under the rocker. It is necessary to drill out the holes around the rockers but there is a dimple marked to drill from. Get half off shipping in the U.S. when you order a set of pan halves. Overseas and international shipping still full price.

181 PR-FL

FLOOR PAN REPLACEMENT FRONT LEFT

We offer steel quarter pan replacements to fix your rusted or damaged panels. They are only intended to be used when just a quarter is necessary. If you need a full half, don't use these... buy the full pan halves and save labor. Stamped to give your floor an original appearance after they are welded in place correctly.

181 PR-FR

FLOOR PAN REPLACEMENT FRONT RIGHT

We offer steel quarter pan replacements to fix your rusted or damaged panels. They are only intended to be used when just a quarter is necessary. If you need a full half, don't use these...buy the full pan halves and save labor. Stamped to give your floor an original appearance after they are welded in place correctly.

181 PR-RL

FLOOR PAN REPLACEMENT REAR LEFT

We offer steel quarter pan replacements to fix your rusted or damaged panels. They are intended to be used when only a quarter is necessary. If you need a full half, don't use these...buy the pan halves and save a lot of labor. Each quarter is stamped to give your floor an original appearance after they are welded correctly. Install with a wire feed welder for best results. (NOTE: 26 INCHES LONG)

181 PR-RR

FLOOR PAN REPLACEMENT REAR RIGHT

181 PR-RL-LONG

FLOOR PAN REPLACEMENT QUARTER, REAR LEFT LONG

Our classic replacement floor panel quarters, but with an improvement. At 36", they're 10" longer than our original panels, which used to leave a gap between the front and rear panels. With these, everything should fit nice and snug.

181 PR-RR-LONG

FLOOR PAN REPLACEMENT QUARTER, REAR RIGHT LONG

181821302

REAR RIGHT FENDER

Original new old stock fenders made by VW. These are the last of the OE VW fenders available.

181821301

REAR LEFT FENDER

Original new old stock fenders made by VW. These are the last of the OE VW fenders available.

181821021E

FRONT LEFT FENDER

FRONT LEFT FENDER - ORIGINAL FACTORY VW MEXICO. These are the last of the OE VW fenders available. They are military style fenders that have three small tabs by the headlight. The tabs were originally used for the headlight black-out covers. You can grind off these tabs to make the fenders look non-military.

181821022E

FRONT RIGHT FENDER

FRONT RIGHT FENDER - ORIGINAL FACTORY VW MEXICO. These are the last of the OE VW fenders available. They are military style fenders that have three small tabs by the headlight. The tabs were originally used for the headlight black-out covers. You can grind off these tabs to make the fenders look non-military.

181809103A

FRONT LEFT WHEEL HOUSING, ORIGINAL VW OF MEXICO

181809104

FRONT RIGHT WHEEL HOUSING, ORIGINAL VW OF MEXICO

181809151

OUTER LEFT ROCKER PANEL, ORIGINAL VW OF MEXICO

This left (driver side) outer rocker panel runs under the door from the front to the rear fender. It does not include the door posts.

181809152

OUTER RIGHT ROCKER PANEL, ORIGINAL VW OF MEXICO

This right (passenger side) outer rocker panel runs under the door from the front to the rear fender. It does not include the door posts.

181809182D

INNER RIGHT ROCKER PANEL REPLACEMENT

This is a replacement inner rocker panel for the right side of the car.

181809181D

INNER LEFT ROCKER PANEL, REPLACEMENT

This is a replacement inner rocker panel for the left side of the car.

111805585U

COVER,REINFORCEMENT PLATE (USED)

When this plate is removed you can easily adjust your steering gear box. This part is new old stock part.

111805585A

COVER FOR REINFORCEMENT PLATE (NOS)

When this plate is removed you can easily adjust your steering gear box. This part is new old stock part.

181813125

REAR PARCEL SHELF, ORIGINAL VW OF MEXICO

181813181

REAR ENGINE COVER PLATE, ORIGINAL VW OF MEXICO

181813315

LOWER REAR CROSSMEMBER, ORIGINAL VW OF MEXICO

181809192

REAR RIGHT SIDE MEMBER, ORIGINAL VW OF MEXICO

181809191

LEFT REAR SIDE MEMBER, ORIGINAL VW OF MEXICO

181833052

DOOR, RIGHT

Our doors are from the VW factory in Mexico. We have new old stock and used.

181833051U

DOOR LEFT, USED

181833052U

RIGHT SIDE DOOR, USED

We only have good used doors instock.

181809811

LEFT INTAKE DUCT, ORIGINAL VW OF MEXICO

NOS left intake duct for the 1974 Thing.

181809812

RIGHT INTAKE DUCT, ORIGINAL VW OF MEXICO

NOS intake duct for the 1974 Thing.

181813301E

REAR PANEL, ORIGINAL VW OF MEXICO

VW Thing Rear Panel.

181805587

REINFORCEMENT LOWER LEFT OEM

Original lower left reinforcement sheet metal from VW of Mexico. View additional images for placement.

181805588

REINFORCEMENT LOWER RIGHT

Lower Right Reinforcement sheet metal for front compartment. View additional images for placement.

181809161

OUTER LEFT CENTER PILLAR, ORIGINAL VW OF MEXICO

181809186

INNER RIGHT PILLER SUPPORT

181805591F

FRONT APRON - FACE ONLY

Front apron (face only) sheet metal panel. This is the vertical apron piece for the front of your Thing. Does not include the horizontal hood lock portion.

181809021

FRONT LEFT SIDE PANEL, ORIGINAL VW OF MEXICO

Front driver side outer quarter panel (front left).

181809110C

SIDE MEMBER, FRONT, UPPER RGHT

181801251T-252T

SEAT TRACK LEFT OR RIGHT

Now it is possible to replace your seat tracks with a heavy duty reproduction. There were some lightweight tracks offered to us from Brazil, but with close inspection we decided to have our own higher-quality tracks manufactured here in the USA. Save $20 by ordering a set.

Special Pricing Available